BDS Lift Kit 4in 4-Link w/6-Bolt T-Case - Gas w/FOX Shocks

Up front these systems use a pair of progressive rate 4in coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4in steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. At 4in of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, a 3in lift block and u-bolts are supplied to lift and level the stance along with a heavy duty air bag spacer brackets. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

Kit Components

BDS012319: 3in Rear Auto Level Box Kit X1

BDS012433: Front Box Kit 1 of 2 X1

BDS012434: Front Box Kit 2 of 2 X1

BDS032302: Front Coil Springs X1

BDS122626: 6-Bolt Transfer Case Index Ring X1

FOX98224700: FOX 2.0 Shock Absorber X2

FOX98224758: FOX 2.0 Shock Absorber X2